sublimation is one of those subjects where the details matter more than the headlines. This page pulls together the background, the mechanisms, and the practical points readers ask about most.
Last reviewed on 2025-11-17. Where a claim depends on a specific study, the study is described rather than over-claimed.
A freeze-dryer consists of a vacuum chamber, temperature-controlled shelves, a condenser, and a vacuum pump. Vials, ampoules, or bulk trays hold the product during the cycle. The condenser traps water vapor as ice at a temperature lower than the product. Cycle development balances shelf temperature, chamber pressure, and time. Scale-up can be difficult because heat and mass transfer change with equipment size, so process analytical tools and conservative validation are often used.
Lyophilization is a dehydration technique in which a product is frozen and the solvent is removed under reduced pressure. The low pressure allows ice to sublimate directly into vapor without passing through a bulk liquid phase. This differs from conventional drying, where heat drives evaporation and can damage heat-sensitive structures. The process is used for biological materials, pharmaceutical formulations, and some foods. Its main advantage is preservation of porous structure and rapid reconstitution.
Formulation composition influences whether freeze-drying produces an intact cake or a collapsed mass. Excipients such as sugars and polymers can raise the collapse temperature and provide bulk during drying. The critical temperature for primary drying is often the collapse temperature or the glass transition temperature of the maximally concentrated phase. If the product temperature exceeds this threshold, the frozen matrix may soften and lose structure. Established practice therefore links shelf temperature and chamber pressure to the formulation's thermal properties.
The physics of freeze-drying couples heat transfer, mass transfer, and phase change. Heat supplied through the shelf must reach the sublimation front without melting the ice or degrading the product. Water vapor then travels through the already dried layer and leaves the chamber, where low pressure and cold traps keep it from returning. The dried layer acts as a resistance to vapor flow, so drying rate changes as the front recedes. Open questions remain about how pore structure and formulation heterogeneity affect drying uniformity at larger scales.
| Property | Value | Notes |
|---|---|---|
| Common synonyms | freeze-drying, lyophilisation, cryodesiccation | Lyophilization is common in pharmaceutical literature. |
| Typical chamber pressure during primary drying | 0.05–0.5 mbar (5–50 Pa) | Must remain below the triple point of water. |
| Typical shelf temperature during freezing | −40 to −20 °C | Lower temperatures may be used for eutectic systems. |
| Typical residual moisture after secondary drying | 0.5–3% w/w | Product-dependent; low moisture improves stability but can cause over-drying. |
| Typical analytical method for residual moisture | Karl Fischer titration or loss on drying | Thermogravimetric methods are also used. |
The physics of lyophilization couples heat transfer, mass transfer, and phase behavior. Sublimation requires a vapor pressure difference between the ice front and the chamber, and the dried layer adds resistance to vapor flow. Amorphous formulations are characterized by a glass transition temperature of the maximally freeze-concentrated solute, often denoted Tg'. Crystalline bulking agents can provide structure, while amorphous excipients stabilize labile components. Open questions remain about spatial heterogeneity, edge effects, and how laboratory cycles scale to production.
Lyophilization is a drying process in which a solvent, usually water, is removed from a frozen material by sublimation under reduced pressure. The material is first solidified, then placed under vacuum so that ice transitions directly to vapor without a bulk liquid phase. This approach suits heat-sensitive substances that would degrade during conventional evaporation. Primary drying removes unbound ice, while secondary drying reduces water that remains adsorbed to the solid matrix. The result is a porous, lightweight solid that can be reconstituted later.
Secondary drying removes bound water that remains after ice sublimation. Shelf temperature is raised gradually while pressure remains low, reducing water content to a target range. Over-drying can cause brittleness or electrostatic issues, while under-drying affects stability. The endpoint is often judged by pressure rise tests, temperature measurements, or water content analysis. Scale-up depends on matching heat and mass transfer across equipment sizes. Small changes in shelf temperature or pressure can alter cycle length substantially.
Lyophilization, or freeze-drying, removes water from a material by freezing it and then lowering pressure so ice changes directly to vapor. The process relies on sublimation, the phase transition from solid to gas without an intervening liquid state. It is used for heat-sensitive materials that would degrade in conventional drying. The three stages are freezing, primary drying, and secondary drying, each with distinct temperature and pressure requirements. In practice, cycle design balances these variables.
The physics of lyophilization depends on phase boundaries and heat and mass transfer. During primary drying, heat supplied to the product must equal the latent heat of sublimation, while water vapor moves through the drying cake to the condenser. If shelf temperature or pressure is set too high, the ice front can exceed the collapse temperature, causing meltback or pore collapse. If conditions are too cold, drying slows and costs rise. Formulation excipients, vial geometry, and freezing rate alter these limits.
Equipment for lyophilization includes a vacuum chamber, temperature-controlled shelves, a condenser, and a vacuum pump. A refrigeration system cools the shelves and condenser below the product's freezing point. Process monitoring often uses Pirani and capacitance manometers, thermocouples, and resistance sensors. Cycle development balances product quality with time and energy use. Some products are annealed during freezing to improve crystallization of bulking agents. Open questions remain about scaling cycles between laboratory, pilot, and production freeze-dryers.
Lyophilization, also called freeze-drying, removes water from a frozen material by sublimation under reduced pressure. The process begins with freezing, which converts free water into ice and may also produce a glassy phase. Primary drying then lowers chamber pressure so ice sublimes directly to vapor without passing through a liquid stage. Secondary drying raises the temperature modestly to remove bound water. The result is a porous, dry solid that usually reconstitutes quickly. Each stage influences pore structure, residual moisture, and stability.
Lyophilization, also known as freeze-drying, is a process that removes water from a material by freezing it and then reducing pressure to allow ice to sublimate directly into vapor. The method begins with a freezing step that solidifies the water content. Next, primary drying lowers the pressure below the triple point of water, enabling sublimation without passing through a liquid phase. A final secondary drying step removes bound water through desorption. This sequence produces a dry, porous cake that can be reconstituted later.
The process relies on the phase diagram of water, where the triple point marks the conditions at which ice, liquid water, and vapor coexist. By maintaining pressure below this point, typically around 0.01 to 0.1 millibar, sublimation becomes the dominant mechanism. Formulations often include excipients such as sugars or polymers that act as lyoprotectants and bulking agents. These additives help preserve the structure of the active ingredient and prevent collapse during drying. The choice of excipient and freezing rate influences the final cake morphology and stability.
=== Urea cycle disorders === Disorders of the distal urea cycle, such as citrullinemia, argininosuccinic aciduria and argininemia are included in newborn screening programs in many jurisdictions that using tandem mass spectrometry to identify key amino acids. Proximal urea cycle defects, such as ornithine transcarbamylase deficiency and carbamoyl phosphate synthetase deficiency are not included in newborn screening panels because they are not reliably detected using current technology, and also because severely affected infants will present with clinical symptoms before newborn screening results are available. Some regions claim to screen for HHH syndrome (hyperammonemia, hyperornithinemia, homocitrullinuria) based on the detection of elevated ornithine levels in the newborn screening dried blood spot, but other sources have shown that affected individuals do not have elevated ornithine at birth.
=== Production and regulation === Progesterone is an endogenous steroid hormone synthesized by the placenta during pregnancy. Progesterone production is regulated by the hypothalamic-pituitary-gonadal axis. The HPG axis regulates the release of both central and peripherally generated ovarian hormones. The hypothalamus produces gonadotropin-releasing hormone (GnRH), whereas the pituitary produces gonadotropins such as luteinizing hormone (LH) and follicle-stimulating hormone (FSH). LH, in turn, stimulates the corpus luteum to produce progesterone after ovulation.
The concept of acheiropoieta (Medieval Greek: αχειροποίητα, lit. 'made without hand'; sing. acheiropoieton) has a long history in Christianity, going back at least to the 6th century. These are images believed to have been miraculously produced, without the agency of any human artist. Among the most prominent acheiropoieta are the Image of Camuliana and the Image of Edessa (also called the "Mandylion"). Both of these were icons of Jesus reported to have existed in the Byzantine Empire, but which are now generally regarded as having been lost or destroyed. Other popular Byzantine acheiropoieta were Hodegetria images of the Virgin Mary. Some images currently held in Italy and other Western European countries, including the Manoppello Image, have been revered as acheiropoieta of Jesus. These are usually associated with the tradition of the Veil of Veronica, according to which the image of Jesus's face was miraculously imprinted on the cloth that Saint Veronica used to wipe the blood and sweat from the face of Jesus when she comforted him on the Via Dolorosa. Although some of these images were once objects of major popular devotions among Catholics, today they have been overshadowed by the fame and prestige of the Shroud of Turin. Another popular relic of Jesus is the Sudarium of Oviedo, which is kept in the Cámara Santa of the Cathedral of San Salvador, in Oviedo, Spain. This is not an acheiropoieton, but rather a simple bloodstained cloth purported to have been wrapped around the head of Jesus after his death.
Female cultivars include 'Liberty Splendor', 'Santa Cruz', and 'Golden Girl', the latter so named because of the striking yellow color of its leaves in the fall; all female cultivars release zero pollen. Many cultivars are listed in the literature in the UK, of which the compact 'Troll' has gained the Royal Horticultural Society's Award of Garden Merit. Ginkgos adapt well to the urban environment, tolerating pollution and confined soil spaces. They rarely have disease problems, even in urban conditions, and are attacked by few insects. Ginkgos are popular subjects for growing as miniature landscapes known as penjing and bonsai; they can be kept artificially small and tended over centuries. The trees are easy to propagate from seed.
Sources: en.wikipedia.org
Polymers are chemical compounds made up of a large number of identical components linked together like chains. Polymers are the raw materials (the resins) used to make what are commonly called plastics and rubber. Plastics and rubber are the final product, created after one or more polymers or additives have been added to a resin during processing, which is then shaped into a final form. Plastics in former and in current widespread use include polyethylene, polypropylene, polyvinyl chloride (PVC), polystyrene, nylons, polyesters, acrylics, polyurethanes, and polycarbonates. Rubbers include natural rubber, styrene-butadiene rubber, chloroprene, and butadiene rubber. Plastics are generally classified as commodity, specialty and engineering plastics. Polyvinyl chloride (PVC) is widely used, inexpensive, and annual production quantities are large. It lends itself to a vast array of applications, from artificial leather to electrical insulation and cabling, packaging, and containers. Its fabrication and processing are simple and well-established. The versatility of PVC is due to the wide range of plasticisers and other additives that it accepts. The term "additives" in polymer science refers to the chemicals and compounds added to the polymer base to modify its material properties. Polycarbonate would be normally considered an engineering plastic (other examples include PEEK, ABS). Such plastics are valued for their superior strengths and other special material properties. They are usually not used for disposable applications, unlike commodity plastics.
In the US, medical residencies traditionally require lengthy hours of their trainees. Early residents literally resided at the hospitals, often working in unpaid positions during their education. During this time, a resident might always be "on call" or share that duty with just one other physician. The American public, and the medical education establishment, recognized that such long hours were counter-productive, since sleep deprivation increases rates of medical errors. This was noted in a landmark study on the effects of sleep deprivation and error rate in an intensive-care unit. The Accreditation Council for Graduate Medical Education (ACGME) has limited the number of work-hours to 80 hours weekly (averaged over 4 weeks), overnight call frequency to no more than one overnight every third day, and 10 hours off between shifts. Still, a review committee may grant exceptions for up to 10%, or a maximum of 88 hours, to individual programs. Until early 2017, duty periods for postgraduate year 1 could not exceed 16 hours per day, while postgraduate year 2 residents and those in subsequent years can have up to a maximum of 24 hours of continuous duty. After early 2017, all years of residents may work up to 24-hour shifts. While these limits are voluntary, adherence has been mandated for the purposes of accreditation, though lack of adherence to hour restrictions is not uncommon.
== Deaths == In the United States, in 2003, a 17-year-old who, according to his parents, was self-treating his anxiety with home-brewed poppy seed tea, died of pulmonary edema caused by acute morphine and codeine intoxication. A Drug Alert posted by the DOJ in 2010 pointed to five deaths possibly resulting from drinking of poppy tea. Since 2010, not less than 10 deaths presumably related to poppy tea consumption were reported by the FDA's Center for Food Safety and Applied Nutrition Adverse Event Reporting System (CAERS). In Canada, on 19 May 2012, a 19-year-old from Nova Scotia died after drinking the tea from a poppy seed pod he purchased on the Internet. In November 2012, a Tasmanian youth died after drinking tea brewed from seed heads, and a 50-year-old Tasmanian man died in similar circumstances in February 2011. Some instances of death or injury associated with the consumption of poppy seed tea have involved users who combined the beverage with other nervous system depressants (i.e. alcohol, tranquillizers, benzodiazepines).
Dendritic cell therapy provokes anti-tumor responses by causing dendritic cells to present tumor antigens to lymphocytes, which activates them, priming them to kill other cells that present the antigen. Dendritic cells are antigen-presenting cells (APCs) in the mammalian immune system. In cancer treatment, they aid cancer antigen targeting. The only approved cellular cancer therapy based on dendritic cells is sipuleucel-T. One method of inducing dendritic cells to present tumor antigens is by vaccination with autologous tumor lysates or short peptides (small parts of the protein that correspond to the protein antigens on cancer cells). These peptides are often given in combination with adjuvants (highly immunogenic substances) to increase the immune and anti-tumor responses. Other adjuvants include proteins or other chemicals that attract and/or activate dendritic cells, such as granulocyte-macrophage colony-stimulating factor (GM-CSF). The most common sources of antigens used for dendritic cell vaccine in glioblastoma (GBM) as an aggressive brain tumor were whole tumor lysate, CMV antigen RNA and tumor-associated peptides like EGFRvIII. Dendritic cells can also be activated in vivo by making tumor cells express GM-CSF. This can be achieved by either genetically engineering tumor cells to produce GM-CSF or by infecting tumor cells with an oncolytic virus that expresses GM-CSF. Another strategy is to remove dendritic cells from the blood of a patient and activate them outside the body.
==== S ==== Salami – cured sausage, fermented and air-dried meat, originating from one or a variety of animals. Historically, salami was popular among Southern European peasants because it can be stored at room temperature for periods of up to 30–40 days once cut, supplementing a possibly meager or inconsistent supply of fresh meat. Varieties of salami are traditionally made across Europe. Salumi – Italian cured meat products that are predominantly made from pork. It comes from the Italian word salume, pl. salumi "salted meat", derived from Latin sal "salt". The term salumi also encompasses bresaola, which is made from beef, and also cooked products such as mortadella and prosciutto cotto. Secca de bœuf – a type of dried salted beef made in Entrevaux. Similar to the Swiss Bindenfleisch, it is typically eaten as a starter. Skerpikjøt – a type of wind-dried mutton, is a delicacy of the Faroe Islands which is traditionally eaten at Christmas but also at other times of the year. Slinzega – a type of air-dried meat produced in Valtellina, in the Italian Alps. It is made in a similar manner to Bresaola, with smaller pieces of meat, which therefore bear a stronger taste. Smithfield ham – a specific form of the country ham, A 1926 Statute of Virginia (passed by the Virginia General Assembly) first regulated the usage of the term "Smithfield Ham".
Sources: en.wikipedia.org
== References == Butler, Rohan, MA., Bury, J.P.T., MA., & Lambert M.E., MA., editors, Documents on British Foreign Policy 1919–1939, 1st Series, Her Majesty's Stationery Office, London, 1960, vol. x, Chapter VIII, "The Plebiscites in Allenstein and Marienwerder January 21 – September 29, 1920" Keynes, John Maynard. A Revision of the Treaty: Being a Sequel to The Economic Consequences of the Peace, Harcourt, Brace, 1922 Kossert, Andreas. Masuren: Ostpreussens vergessener Süden, ISBN 3-570-55006-0 (in German) Mayer, S. L., MA. History of the First World War – Plebiscites:Self Determination in Action, Peter Young, MA., editor, BPC Publishing Ltd., UK., 1971. Rhode, Gotthold. Die Ostgebiete des Deutschen Reiches, Holzner-Verlag Würzburg, 1956. Tooley, T. Hunt. National Identity and Weimar Germany: Upper Silesia and the Eastern Border, 1918–1922, U of Nebraska Press, 1997, ISBN 0-8032-4429-0 Topolski, Jerzy. An Outline History of Poland, Interpress, 1986, ISBN 83-223-2118-X Wambaugh, Sarah. Plebiscites since the World War, Washington DC, 1933. I pp 99–141; II pp 48–107 Williamson, David G. The British in Germany 1918–1930, Oxford, 1991, ISBN 0-85496-584-X
She cuts ties with Otto and brings Eric out of retirement to launch SternTao, targeting fintech company Tender. After a one-night stand with Tender CFO Whitney Halberstram, Harper is tipped off by journalist James Dycker that Tender is concealing misconduct. She hires Sweetpea and Kwabena Bannerman—her former colleague and casual partner—and sends them to Accra to investigate Tender’s acquisitions, where they uncover falsified profits and recycled revenue. Harper presents the findings at an investment conference, causing Tender’s stock to fall 28%. During this period, she learns her estranged mother has died and struggles to grieve amid her work. Eric later transfers his ownership stake in SternTao to her and withdraws from the partnership without explanation, having been blackmailed, leaving Harper devastated. She reconciles with Yasmin after helping circulate claims that the Labour government suppressed concerns about Tender, prompting investigations and a new audit. The Tender short ultimately earns SternTao £110 million, and Harper, Sweetpea, and Kwabena scout a new office. In Paris, Harper attends a fundraiser hosted by Yasmin for Reform MP Sebastian Stefanowicz and is disturbed by the guests (including the Nazi-sympathizing Bauer family) and Yasmin's use of escorts; Yasmin shows her a compromising recording of Eric with an underage prostitute, leaving Harper shaken. She later reflects on the Tender short in an interview with journalist Patrick Radden Keefe and ponders her future.
=== Places of worship === There are three Church of England churches in Wilmslow: St Bartholomew's, St Anne's and St John's. St Bartholomew's is a 16th-century building, which was modified in the 19th century; it has a turreted bell tower. The first rector of the church was a Thomas Dale, who is buried beneath a headstone presumably engraved by him outside the entrance to the church. Wilmslow Methodist Church occupies a modern building close to the town centre, replacing an 1886 building which itself replaced the original 1798 church, built seven years after John Wesley's death. The Sacred Heart & St Teresa's Church is the Roman Catholic church and dates from the late 19th century. Dean Row Chapel, 2 miles (3.2 km) east of the town centre, is a Grade II* listed building built around the end of the 17th century. Initially Presbyterian, it is now a Unitarian chapel. There is also a United Reformed Church in Wilmslow, close to the town centre.
== Reception == Justin Chang gave the film a positive review in Variety, describing it as "a precocious if rather precious debut feature for writer-director Jennifer Phang", praising the film's computer generated effects and the representation of Tim and Pam's relationship through Aasulv Wolf Austad's cinematography, comparing it to the works of Apichatpong Weerasethakul. The Hollywood Reporter was similarly positive, criticizing the film as suffering from budget restraints, but praising Phang's depiction of the two households for capturing dark humor as well as "real pain and anguish", in addition to praising Alexander Agate's performance.
=== Treatment approach === Any interventions done are matched with the needs of each individual in an ethical and respected manner. Health belief model encourages increasing individuals' perceived susceptibility to negative health outcomes and making individuals aware of the severity of such negative health behavior outcomes. E.g. through health promotion messages. In addition, the health belief model suggests the need to focus on the benefits of health behaviors and the fact that barriers to action are easily overcome. The theory of planned behavior suggests using persuasive messages for tackling behavioral beliefs to increase the readiness to perform a behavior, called intentions. The theory of planned behavior advocates the need to tackle normative beliefs and control beliefs in any attempt to change behavior. Challenging the normative beliefs is not enough but to follow through the intention with self-efficacy from individual's mastery in problem solving and task completion is important to bring about a positive change. Self efficacy is often cemented through standard persuasive techniques.
Sources: en.wikipedia.org
Yes, the terms are generally interchangeable. Lyophilization is more common in pharmaceutical and laboratory contexts, while freeze-drying appears widely in food science and general writing. Both describe removal of solvent by sublimation under vacuum after freezing.
Reduced pressure keeps the process below the triple point of water, so ice can sublimate directly to vapor. It also lowers the temperature needed for drying, which helps preserve heat-sensitive materials. Without vacuum, melting or boiling could occur instead of controlled sublimation.
The rate depends on heat transfer to the product and mass transfer of vapor through the dried layer. A cold condenser, adequate vacuum, and suitable shelf temperature all influence speed. Formulation properties such as solid content and collapse temperature also set practical limits.
Primary drying removes ice by sublimation at low pressure and low shelf temperature. Secondary drying removes bound water by raising the shelf temperature, often under the same vacuum. The two stages differ in the water state being removed.